Club Face Matters

In the following video Andrew shares information on the most common fault he sees with the everyday golfer - an open or weak club face and the effect this one element can have on ball flight and striking.

I have no doubt that the club face angle, in particular in the early downswing, is an integral element to playing good golf. All golfers need to get the face in place in the downswing in order to be able to make a quality strike and manage the face angle for accurate outcomes.

When the club face is overly weak/open:

  • The weight will typically stay back as the pivot stalls

  • The handle will be too far back at impact, resulting in high and weak shots

  • Distance and compression will be compromised

  • The strike will almost always be picky with very little club to ground interaction post impact

  • Trajectory will be overly high with the prevailing misses being pulls and/or fades

When the club face is overly strong/closed:

  • The hips will drive forward too far in an attempt to slow down face rotation

  • The hands will be well forward at impact, resulting in low spinning and low flighted shots

  • Distance will typically not be a problem

  • The quality of strike will often be acceptable

  • Appropriate height will be a challenge, especially with a longer iron and the prevailing miss will be a hot, low ball flight with a tendency towards blocks and hooks

What can you do to improve? Take an honest inventory on which pattern discussed above you typically fall under. Once you have an idea, start working on improving your club face angle in the early downswing. This will most commonly be achieved with improved wrist angles, but know that the grip will also play a role. Create a game plan and set about making some long lasting changes. You can do this!!

Thanks for reading and please shout if you have any questions.

Stop the Scoop

Are you tired of putting everything you have into your game, only to see the ball literally limp off the club face after each swing? There’s just no return on the energy you’re putting in. Today I’m going to show you how to get the sizzle back into your ball striking. Watch this video first…

I often ask my students which club imparts the most energy into the ball relative to club speed. The answer? Putter. Why? It has the least loft at impact and delivers the least oblique strike to the ball. Learn to reduce the loft coming into impact in order to start compressing the ball off the club face.

  1. Get the club face in place early in the downswing. This is done by bowing/flexing the lead wrist which in turn will de-loft and strengthen the club face by the time impact occurs.

  2. Try the Preset Club Face Drill. Using a 7 iron, take the club back so that the shaft is parallel to the ground making sure the lead wrist and leading edge are tilted down towards the ground slightly. Wind the arms back 1 foot and rotate through, working to maintain the face and wrist angles. The ball flight should be low and penetrating with a slight draw.

  3. Make sure that the low point of the swing arc is forward of where impact occurs. This can be rehearsed by making two practice swings between each shot you hit on the range where the sole of the club bottoms out well in front of where it was resting on the ground. The handle and weight must be forward at impact in order for this to occur.

compression.jpg

If you’re a scooper you owe it to yourself to give these ideas a try. My 30 years of teaching golf say that they truly do work and with a little patience and persistence you’ll significantly improve the quality of your ball striking.

Remember - there is no magic, only hard work and a good solid plan. Get to it!